We are looking for sidewalk and roadway materials of type T2 and type P1.
Characteristics :
• Borders type T2 Border sidewalk and road 14cm, passage lowered PMR 2cm
• Borders of type P1
- Quantity required type T2: 1650 pieces (1650 ml)
- Quantity required type P1: 2180 pcs (2180 ml)
Details:
• Complies with the requirements of Article 4 of the CCTG No. 31
• Concrete look DN1000 + cast iron buffer D400 height <2m
Quantity required: 18 Units
• EU HDPE 315/160 connection lugs + cast iron buffer.
Quantity required: 63 Units
• DN1000 concrete cover + buffer with concave grid 600x600 cast iron class C250
Quantity required: 9 Units
• DN1000 concrete liner + buffer with C250 cast iron type T profile
Quantity required: 14 Units
• DN1000 concrete cover + DN 600 cast iron buffer class C250
Quantity required: 3 Units
• Connection eye EP 500x500 concrete including cast iron buffer C250
Quantity required: 63 Units
• Regulating sight at the outlet of the basin
Quantity required: 1 Unit
• DN500 concrete nozzle head
Quantity required: 4 Units
• 500x500 concrete look at the bottom of the chute
Quantity required: 126 units
• 500x500 concrete connection connection
Quantity required: 63 units
Details:
The looks will meet the specifications of CCTG 70
- The junction between PVC CR8 manifolds and manholes will be achieved through a flexible seal, type FORSHEDA or similar. Sealed by butyl seal.
- Manhole fasteners complying with the NF EN 124 standard and Article II.1 of Section 70 Part I. They shall be of a class adapted to the load conditions, to be adapted in accordance with the requirements of Article 5 of the standard.
- The cast irons used are subject to the specifications of standard NF EN 1563. Exclusively made of ductile iron F GS500-7. From the factory owner of the right to use the NF mark.
The EU network closure devices are of type:
- Swivel cast iron buffer with 600mm diameter, ventilated circular opening and continuous elastomer seal for DN1000 manholes
- Ductile cast iron buffer C250, articulated, removable, with its square frame and bearing the EU marking for manholes DN 400 or less.
- The cast irons used are subject to the specifications of standard NF EN 1563. Ductile iron F GS500-7, from factory holding the right to use the NF mark.
The closure devices of the EP network are of type:
o Concave square grille 600x600mm