EN 45545-2:2020 Fire protection on railway vehicles

EN 45545-2:2020Fire protection on railway vehicles- European Standard
EN 45545-2:2020 Fire protection of railway vehicles -Part 2: Requirement for fire behaviors of materials and components'
'
EN 45545-2:2020Fire protection on railway vehicles - Standard Brief
EN 45545-2:2020 this European Standard shall be given the status of a national, standard, and conflicting national standards shall be withdrawn at the latest by February 2021
Hazard levels (HL1 to HL3) have been determined using a product of the relation between
operation categories and design categories defined in EN 45545-1. The requirement sets for listed products are given in below Table and are designated R1 to R28.
EN 45545-2:2020Fire protection on railway vehicles – Scope
This document specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.
The operation and design categories defined in EN 45545-1 are used to establish hazard levels that are used as the basis of a classification system.-
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.
EN 45545-2:2020Fire protection on railway vehicles - Hazard levels
HL1, HL2, HL3
EN 45545-2: Fire protection on railway vehicles -Reference Standard
EN 45545-1: Fire Protection of railway Vehicles -Part 1: General
EN 45545-2: Requirement for fire behaviour of materials and components-
EN 45545-3: Fire resistance requirements for fire barriers and partitions
EN 45545-4: Fire safety requirements for railway rolling stock design-
EN 45545-5: Fire safety requirements for electrical equipment'
EN 45545-6: Fire control and management system
EN 45545-7: Flammable liquid and flammable gas installations-'

1